Snow Performance SNO-201-BRD Stage 1 Boost Cooler Forced Induction Water-Methanol Injection Kit (Stainless St

Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.

Add-On Part	SNO-40040-BRD, SNO-40060-BRD, SNO-38FIL, SNO-19110
Bottle Color	White
Description_ASC	Kit Contents: 300 PSI UHO Pump, 3Qt Tank, Adjustable Boost Pressure Switch/Relay, 20 AMP Fuse/Fuse Holder, (1) 1', (1) 2', (1) 5' Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, LED Alert System, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve
Description_ASM	All Forced Induction Gasoline Engines
Description_DEF	Nitrous Oxide Injection System Kit
Description_DES	Stage 1 Boost Cooler Forced Induction Water-Methanol Injection Kit (Stainless St
Description_EXT	Stage 1 Boost CoolerForced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line; 4AN Fittings).
Description_FAB	Adjustable Boost Activated Water-Meth Engagement; 100% Methanol Resistant; Low Level Monitoring; LED Alert System; High Flow Check Valve; 300 PSI UHO Pump/SP Hypersonic Nozzles; Made In U.S.A.
Description_INV	Snow Performance Stage 1 Boost Cooler
Description_MKT	Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Description_SHO	Stage 1 Boost Cooler
height	15.0
Hose Color	Stainless
Hose Material	Stainless Braided
length	20.0
LTL	N
Material	Stainless Steel
Prop 65 (C, R or CR)	CR
Prop 65 - Short Label	prop65_warning.jpg
Prop 65 Yes/No	Yes
Title	Snow Performance Stage 1 Boost Cooler Forced Induction Water-Methanol Injection Kit (Stainless St
weight	9.0
width	5.0