BDS Suspension BDS761FS 2020-2023 Chevy-GMC 2500-3500 HD 3In with Overloads - Fox 2.0

Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Description_ASC	Disassembly/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool #CH48809
Description_ASC	Some minor trimming may be necessary to fit certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks and typically consists of trimming the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb deeper backspacing and shorter/ narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet
Description_DEF	Suspension Lift Kit
Description_DES	2020-2023 GM 2500/3500 HD 3In with Overloads - Fox 2.0
Description_EXT	20-ON GM 2500/3500 HD Front w/UCA| PS| 2.0| IFP| 5.6| 1.5-2.5 Lift
Description_EXT	2011-2023 Chevy/GMC 2500/3500 HD 2 Rear Block w/ ovrld
Description_EXT	2020-2023 Chevy-GMC 2500-3500 HD 3In with Overloads - Fox 2.0
Description_EXT	2020-2023 Chevy/GMC 2500/3500 HD 3 Box Kit
Description_EXT	Fox 2.0 Shock 27.95 x 17.35 x 2- EB1/EB1
Description_FAB	Differential relocation to improve CV operating angle.
Description_FAB	FOX 2.0 Performance Series shocks offer improved performance and damper capacity.
Description_FAB	High strength cast torsion bar keys use an indexed design to provide additional ride height.
Description_FAB	Performance UCAs increase strength and allow for more suspension travel
Description_FAB	Rear block and u-bolt kit provides lift while maintaining spring function and load capacity
Description_FAB	Sway bar relocation for proper clearance
Description_MKT	Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.
Description_MKT	FOX 2.0 IFP Shocks
Description_MKT	HD Upper Control Arms
Description_MKT	In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.0 performance series IFP shocks ready to soak up the terrain.
Description_MKT	Level out your 2020-2023 Chevy Silverado and GMC Sierra 2500 HD 4WD truck and improve the ride with this 3-inch leveling lift kit featuring FOX 2.0 IFP Performance Series shocks from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.
Description_MKT	These FOX 2.0 Performance Series monotube shocks step up your vehicles performance and capability 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion along with an internal floating piston (IFP) to eliminate oil aeration in extreme conditions FOX’s proprietary internals 5/8" hard chrome plated heat-treated alloy shaft ready for easy installation. These shocks come precision-tuned for application specific valving for predicable ride quality capable of handling the roughest road conditions.
Description_MKT	Up front the lift kit includes FOX 2.0 Performance Series IFP shocks and heavy duty tubular upper control arms for increased strength. Along with the control arms a pair of indexed cast steel torsion bar keys are supplied upfront to lift the vehicle and a small differential relocation kit is supplied to correct CV axle operating angles without affecting ground clearance. To eliminate sway bar interference a pair of sway bar relocation brackets is used which maintains proper operating angle.
Description_SHO	Suspension lift kit
Title	3 Inch Lift Kit - Chevy Silverado or GMC Sierra 2500HD/3500HD (20-23)