B&M 71505 Differential Cover

B&M Cast Aluminum Differential Covers are designed to strengthen the differential by preventing case distortion and ring gear & bearing cap deflection. Constructed of military grade (MIL-A-8625) black anodized A356.0-T6 aluminum, these rugged covers significantly increase the fluid capacity and dissipate heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. Additional features include an engraved B&M logo, drain and fill port locations, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.

Resources

Installation Instructions

Description_ASC	Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
Description_ASM	Designed to fit most vehicles with GM 9.5in. 14 Bolt differential; however each vehicle may have other interfering components and adequate clearance and fitment should be verified prior to purchase/installation. Refer to ID guide and measurement diagram for specific dimensions. Check clearances for fit-Gasket Not Included.
Description_DEF	Differential Cover
Description_DES	Differential Cover
Description_EXT	Differential Cover; For Use w/GM 9.5 in. 14 Bolt; Incl. Cover/Fill And Drain Plugs/Bolts/Washers/Load Bolts/Nuts; Black;
Description_FAB	Additional Oil Capacity
Description_FAB	Cast Aluminum
Description_FAB	Engraved B&M Logo
Description_FAB	Lifetime Limited Warranty
Description_FAB	Magnetic Drain Plug For Easy Servicing
Description_INV	DIFF COVER-BLACK; GM 9.5in. 14-BOLT CAST
Description_KEY	71505; differential cover; aluminum cover; rear end cover; cubierta diferencial; cubierta de aluminio; cubierta de extreme posterior
Description_MKT	B&M Cast Aluminum Differential Covers are designed to strengthen the differential by preventing case distortion and ring gear & bearing cap deflection. Constructed of military grade (MIL-A-8625) black anodized A356.0-T6 aluminum, these rugged covers significantly increase the fluid capacity and dissipate heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. Additional features include an engraved B&M logo, drain and fill port locations, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.
Description_MKT	Our engineers designed the line of Hi-Tek differential covers to not only look good but address a number of weaknesses of the factory stamped steel covers. First, they started by constructing the covers of thick A356.0-T6 aluminum, which dissipates heat much faster than the factory steel unit keeping the fluid temperature lower under high-stress loads vs. a steel cover. Then for added durability, we added a reinforced center bar for extra strength along with load bolts to help prevent bearing cap deflection under severe loads. The internal shape of the cover retains the smooth round back internally to help keep the fluid flow going over the ring gear to properly lubricate the bearings, the ring and pinion gears. Additional features include a magnetic drain plug for catching ferrous metal particles, MIL-Spec (MIL-A-8625) black anodized finish, machined B&M logo, and all necessary hardware and easy to follow detailed instructions for a quick and simple installation you can do at home. Note: Gasket not Included.
Description_SHO	Differential Cover
height	5.9
length	14.4
LTL	N
weight	10.35
width	14.4